RLE Falcon EM - Manual (Page 92)

Communication User Guide: Falcon FMS
78 970 484-6510 www.rletech.com
Description: Enter a description for the BCM.
Alarm Dial Out: Enter the Phone Number Configuration Entry ID for up to five pager numbers to which
the FMS will send notification when any alarm for this Slave occurs. The Entry ID numbers correspond to
phone numbers configured from the Configure Phone Number links at the bottom of the Modem
Configuration page. Separate the ID numbers with commas. Enter zero to disable. The FMS will dial the
lowest number listed regardless of the order the numbers are listed.
Example: If the Alarm dial out string is set to “3, 5, 1, 0, 0”, the FMS will dial Pager #1, Pager #3 and then
Pager #5 when an alarm occurs.
Email Recipient Notification: Check the recipient email addresses that require notification when any
alarm occurs on this BCM. Email addresses are displayed once they are entered on the Email Configuration
page.
5-6.2 Modbus Register Links
Pressing a Modbus Registers link next to the BCM on the Modbus BCM Unit Configuration page will
display.
Figure 5-20: Modbus Registers Screen
5-6.2.1 CB# Links
Pressing a CB # link will display the Circuit Breaker Configurations for each BCM.