RLE Falcon EM - Manual (Page 68)

FMS Web Interface User Guide: Falcon FMS
54 970 484-6510 www.rletech.com
CHAPTER 4: FMS WEB INTERFACE
The FMS Web interface provides a convenient way to check and monitor the FMS status via the Web. To
access the FMS Main Menu, or Home page, type the IP address of the FMS into the location bar of the
Web browser. When the prompt appears, enter the default user name (falcon) and password (none—leave
blank); for more information on accessing the FMS Home page, see Chapter 3: FMS Configuration, pg.
20.
4-1 MAIN MENU/ HOME PAGE
The Falcon logo (default), IP camera image and/or company logo can be displayed on the Main Menu; see
section 3-11 URL Links (1-5), pg. 38, for more information. Figure 3-3 shows a sample of what the FMS
homepage could look like when configured.
Figure 4-1: An example of what a configured FMS could look like.
The bottom of the FMS Main Menu features columns that list the FMS configured inputs. The number of
inputs displayed is configurable from the Configuration menu; see Chapter 3: FMS Configuration, pg. 20.
Each input has a box with its number, name, and status. The box is shaded to signal the inputs status. Color
codes are as follows:
Table 4-1: Color Definitions
Green Input is normal–not in an alarm state.
Yellow Analog inputs only–input is in a high alarm 1 or low alarm 1 state.
Red Analog input is in a high alarm 2 or low alarm 2 state. Digital input is in an alarm state.
Blue Alarm/Input disabled by a schedule.
White Input is not configured–spare point for future use.
(no shading)
Magenta, Green, or Gold
Digital Status point is on. This color is configurable under the System Configuration Menu.