Super Systems Paperless VR - Manual (Page 33)

Super Systems Inc. Page 32 Video Recorder Manual Version 2 Rev. B
The fourth option, “Advanced”, will allow the
users the ability to delete datalog data from
specific time frames. This option can be used to
free up space on the flash card, or to cause a
resynchronization between the VR screen and
data logger.
Description – This option deletes data between
two specific dates. If these dates fall within the
past week, you may choose to restart the screen
to synchronize that data.
The user can select the starting date and time
from the “Between:” section and the ending time from the “and” section.
The user will have to confirm the deletion twice in order for the files to be deleted.
Since the VR screen may need to be restarted in order to resynchronize with the data logger, the user will
have the option to restart the screen from the
Purge Data menu.
Slave Instrument Setup
This menu option is only available with versions 2.01+ on
the VR Brick and with version 3.11+ of the screen software.
The Slave Instrument Setup menu option will allow the
user to set up to ten slave instruments off of the Video
Recorder. To set the slave type, select the appropriate
slave instrument type and press the Edit button.
Note: Any
slave instrument must be wired to the RS485 Slave
terminals on the Video Recorder brick
.
The list of possible slave types is:
 SSi AC20/7EK/20Q/20PQ
 SSi 7SL
 9200 LP 1
 9200 LP 2
 9200 LP 3
 AE Flow_Meter
 Eur 2404, E2704 LP 1
 Eur 2500 LP 1
 Eur 2500 LP 2, E2704 LP 2
 E2704 LP 3