Grass Valley K2 Media Client User Manual Oct.10 2006 - Manual (Page 127)

August 15, 2006 K2 Media Client User Manual 127
Working with assets
Moving an asset to another bin
There are two ways to move an asset to another bin: Using Cut/Paste or the Send To
dialog box.
Using the cut and paste commands
1. Select the asset(s) in the asset list.
2. Cut the asset to the clipboard using one of the following:
• Select Cut in the asset context menu, or
• Select Edit in the AppCenter main menu, then choose Cut .
• Use keyboard shortcut Ctrl + X .
3. Change the current bin to the target bin. (Refer to “Changing current bin using
'Look in' drop-down list.” on page 123 .)
4. Paste the asset(s) from the clipboard to the current bin.
The Paste operation is accessed in the same way as Cut.
NOTE: If an asset is locked or currently being recorded, it remains in the existing
bin while the remaining assets are moved to a new bin with the specified name.
Using Send To
1. Select the asset(s) in the Asset List.
2. To open the Send To dialog box using do one of following:
• Select Clips | Send To , or
• Select Send To in the asset context menu, or
• Click the Send To button in the Clips pane.
If the Send To button is not displayed in the Clips pane, refer to assignable
buttons in
“Guide to using the Clips pane” on page 116 .
The Send dialog box appears.
3. Click the Bin tab.
4. Select Move to in the right-hand drop-list.