Grass Valley K2 Media Client User Manual Oct.10 2006 - Manual (Page 185)

August 15, 2006 K2 Media Client User Manual 185
Record channel video setup for the HD/SD K2 Media Client
Record channel video setup for the HD/SD K2 Media Client
Under System|
Configuration,
select the Channel
tab...
And make settings as needed…
Video input
format
a
a. Changing video input format does not require a restart of the HD/SD K2 Media Client. If
changing between SD and HD, however, there is a wait time up to 24 seconds for each recorder
channel after clicking the OK button in Configuration Manager.
NTSC (SD) or PAL (SD) (depending on video reference setting)
720p
1080i
Compression
format MPEG
Long GOP Yes (IBBPBBPBBPBBPBB)
No (I-frame only)
Chroma format 4:2:2
4:2:0
Recording data
rate
b
NTSC & PAL:
SD 4:2:0 Between 2-15 Mb/s. The default value is 15.
SD 4:2:2 Between 4-50 Mb/s. The default value is 25.
1080 4:2:0 Between 20-80 Mb/s.
1080 4:2:2 Between 20-100 Mb/s.
720 4:2:0 Between 12-80 Mb/s.
720 4:2:2 Between 20-100 Mb/s.
Compress VBI Yes (Active picture plus VBI)
No (Active picture only)
If No is selected, an additional option appears:
Uncompressed VBI lines (luma only) Between 7 and 22. (Do not
select line 6.) Select None or select up to 6 lines.
c d
Video input type SDI
VITC Input VITC selections are only available if the video input is set to SD video.
Automatic VITC
detection Yes (The VITC lines are specified as Starting VITC line and Ending
VITC line)
No (The VITC lines are specified as VITC line 1 and VITC line 2)
Starting VITC line/
VITC line 1 NTSC: Between 10 and 20; the default value is 16.
PAL: Between 6 and 22; the default value is 10.
Ending VITC line/
VITC line 2 NTSC: Between 10 and 20; the default value is 18.
PAL: Between 6 and 22; the default value is 20.
VITC present Reference source is present Green LED indicates
source is present. Black
LED indicates source is
not present.
Record ancillary
data Yes
No