Grass Valley K2 Media Client User Manual Oct.10 2006 - Manual (Page 165)

August 15, 2006 K2 Media Client User Manual 165
Importing and exporting streaming media
3. Click Stream .
4. In the Source section, browse to locate and select the source clip. (For some
cross-product transfers, depending on software versions, you might need to specify
the volume, bin, and media asset name. Refer to release notes for specifications.)
The Look in label shows the current location. The list under the Look in label
displays the contents of the current location. You can select items in the list such
as machine,
disk volume or a bin, to explore its contents.
Clicking the up-arrow button moves up one directory level in the storage
hierarchy.
The Look in drop-down list allows you to choose from one of the most recent source
locations visited (history).
5. In the Destination section, Bin Name displays the name of the current bin which
specifies the destination bin.
6. Specify a clip name, if desired, by clicking the Clip Name edit control.
7. Click Import to start the transfer.
NOTE: Import is a background task and can be monitored using the Transfer
Monitor.
Exporting streaming media
1. In the Clips Pane, select the asset(s) you want to transfer.
2. Open the Send to dialog box using one of the following steps:
• Select Clips | Send to , or
• Right-click the clip and select Send to .
The Send to dialog box appears.
3. Click Stream, then locate and select the stream destination.
The Stream to label shows the current destination. The list under the Stream to label