Grass Valley K2 Media Client User Manual Oct.10 2006 - Manual (Page 187)

August 15, 2006 K2 Media Client User Manual 187
Record channel audio setup
Record channel audio setup
Play channel video setup
The play channel settings differ based on whether the channel is on an SD K2 Media
Client or an HD/SD K2 Media Client. Because the channels on an SD K2 Media
Client are bi-directional, the record and play channel settings are both located on the
same channel. On an HD/SD K2 Media Client, the record and play channel settings
are on separate record and play channels.
NOTE: If you are using a channel suite with channels from multiple K2 Media
Clients, make sure that you have selected a channel from the K2 Media Client that
you want to configure before accessing Configuration Manager.
The following tables describe the play settings:
“Play channel video setup: HD/SD K2 Media Client” on page 189
“Play channel video setup: SD K2 Media Client” on page 190
Under System|
Configuration,
select the Channel
tab...
And make settings as needed…
Audio input AES/EBU
Embedded
Number of audio
inputs 2
4 (Maximum for AES)
6
8
12
16
Embedded input
group(s) 2 or 4 inputs :
Group 1
Group 2
Group 3
Group 4
6 or 8 inputs :
Group 1 & 2
Group 3 & 4
12 inputs :
Group 1, 2, 3
16 inputs :
Group 1, 2, 3, 4
A1/A2 input format
(Also A3/A4, A5/
A6, etc. depending
on “Number of audio
inputs” selection
above)
16-bit PCM
24-bit PCM
AC-3
Dolby-E
Timing offset Between -200ms and 200ms
Channel
monitoring
(displays audio
meters) Yes
No