Grass Valley K2 Media Client User Manual Oct.10 2006 - Manual (Page 75)

August 15, 2006 K2 Media Client User Manual 75
Editing a clip
2. Enter a timecode value, then click OK or press Enter .
Alternatively: Use the current position scrub bar in the timecode entry
dialog box to locate the desired frame, then select OK .
Moving clip marks: Using the clip length control
Entering a new clip length moves the mark-out point.
1. Click the Length timecode entry control .
2. Enter a new clip length and click OK .
The clip length changes by moving the mark-out point.
Clearing mark-in/mark-out points
Clearing a mark point resets the mark to its default position— mark-in is set to the
beginning of available media; mark-out is set to the last frame of available media.
To clear a mark point, do one of the following:
• In Play view, click and hold the In or Out button, then choose Clear Mark in the
pop-up menu.
• In Play view, select the mark-in or the mark-out timecode control and click Clear ,
then OK to clear the mark.
Clear
(Click Clear, then
OK to clear the mark.)