Grass Valley K2 Media Client User Manual Oct.10 2006 - Manual (Page 191)

August 15, 2006 K2 Media Client User Manual 191
Adjusting video output timing
Adjusting video output timing
Adjusting play speed options
Timecode setup
Under System|
Configuration,
select the Channel
tab…
And make settings as needed…
Video Timing Frames Delays video output. Range: NTSC 0-1 frames, PAL 0-3
frames
Lines
(coarse) Delays the video output. Range: NTSC (525 lines) 0-524
lines, PAL (625 lines) 0-624 lines.
Samples
(fine) Delays the video output. Range: NTSC (525 lines) 0-1715
clock samples, PAL (625 lines) 0-1727 clock samples.
Under System| Configuration,
select the Panel tab…
And make settings as needed…
Jog speed Playback advances or retards one frame at a time according to
the direction of the setting.
Shuttle speed Sets the speed for shuttle play or playback.
VAR setting Variable speed play. Specify the play speed; otherwise, the
speed remains at the preset play speed or the last variable play
speed used.
Always start at VAR preset Initial play speed can be set to start at the preset speed.
Under System|
Configuration,
select the System
tab…
And make settings as needed…
Time of Day Time of day
source System clock This settings uses the Windows
operating system clock. If you select
this source you should verify that
the clock’s time is correct.
VITC input Choose if using VITC timecode
LTC input Choose if using LTC timecode.
Time of day source
(SD only) If using VITC or LTC as the time of
day, select which channel you want
to use as the Time of Day source.