Grass Valley K2 Media Client User Manual Oct.10 2006 - Manual (Page 99)

August 15, 2006 K2 Media Client User Manual 99
Editing and rearranging events in a playlist
open the timecode entry dialog box.
2. Enter a timecode value then click OK or press Enter .
Alternatively: Use the current position scrub bar in the timecode entry
dialog box to locate the desired frame, then click OK .
3. Do one of the following:
• For an existing event, click Accept to propagate the change to the event in the
list.
• For a new event, click Insert to add the event to the list.
Using the event length control
Entering a new event length moves the Event-out point.
1. Select the Length timecode entry control .
2. Enter a new event length and click OK to close the Length dialog box.
The event length changes by moving the event-out point.
3. Do one of the following:
• For an existing event, click Accept to propagate the change to the event in the
list.
• For a new event, click Insert to add the event to the list.
Clearing event marks
Clearing an event mark resets the mark to the marks used in the source clip. Event-in
is set to the mark-in point of the source clip, and event-out is set to the mark-out point
of the source clip.
To clear an event mark, do one of the following:
• With the event loaded in Event view, click and hold the Event In or Event Out
button, then choose Clear Mark in the pop-up menu.
• With the event loaded in Event view, select the Event-In or Event-Out timecode
control and click Clear , then OK to clear the mark.