Grass Valley K2 Media Client User Manual Oct.10 2006 - Manual (Page 38)

38 K2 Media Client User Manual August 15, 2006
Chapter 3 Using AppCenter
About AppCenter
AppCenter is the built-in video disk recorder and player application that provides a
single interface for tasks such as channel control, configuration, clip management,
media transfers, channel monitoring, and system monitoring.
You can access AppCenter using a network-connected PC with Control Point
software, or you can access it by connecting a VGA monitor, mouse, and keyboard to
the K2 Media Client. If connecting directly, the monitor must be capable of 1280 x
1024 @70Hz. Otherwise, AppCenter might limit the number of visible channels to
three or less.
NOTE: If you are using AppCenter with the optional Time Delay application, see
the Time Delay on-line help for information on using Time Delay with AppCenter.
AppCenter user interface overview
Clips pane
Displays media stored
on media disks
Monitor pane
Displays channel
status information
Channel pane
Displays channels in their
current control modes
Click anywhere in the
Monitor pane or Channel
pane to select a
channel Click and drag borders
to resize or hide panes
A drop-down
list here selects
the channel's
application
This menu
changes for
the current
channel
application
These buttons
control channel
operations
These buttons
control media
management
operations
These tabs
switch views
for the channel
application
Statusbar
Displays current
operations and
system status
On-screen
transport controls