Grass Valley Maestro Master Control v.1.7 - Manual (Page 108)

104 Maestro Channel Branding User Guide
Section 5 — The Maestro Configuration Editor
When creating a name for a Maestro configuration file, it’s a good practice
to use letters and numbers only. See the
Configuration Set Naming Rules
section on page 106 , if you want to use punctuation.
Error Detection and Explanation - Fields that contain insufficient or inap-
propriate information are flagged. An error message will appear on the
bottom of the window with the error type highlighted in red. See
Figure 82 .
Figure 82. Example Error Message
Row Editing
• To add a row (or rows) at the bottom of a table, position the cursor any-
where within the table, right-click, and select “Add Row(s).”
• To add one row on the bottom of the table, press INSERT.
• To clear a row of user data, select the blank box on the left end of the
row. Right-click and select Cut.”
• To clear a row of all data, press DELETE. To delete the row entirely,
right-click and select “Delete Row(s).”
Saving
• Press "Apply" to save the changes in memory (they are not saved to disk
until you select File > Save). If you attempt to close the Configuration
File before applying your changes, a pop up message will appear
asking you to confirm or abandon the changes before editing a new file.
• You can exit without writing even after changes have been Applied and
the table closed by selecting "File > Exit." and answering "No" to the
"Save?" question.