Grass Valley Maestro Master Control v.1.7 User Manual
Page 222
Advertising
218
Maestro Channel Branding User Guide
Section 5 — The Maestro Configuration Editor
2.
Select the Maestro configuration set to be re-compiled by going to “File
> Open” or clicking on the Open icon and selecting the preferred set to
be recompiled.
3.
If the system displays a Validation Report, you must check the
indicated table(s) and make corrections as indicated.
You can use the links in the Description column to display the table(s)
with errors.
4.
As an added precaution, it is recommended that each table in the set be
opened before recompiling the set.
5.
Save the configuration file.
6.
Compile the file by going to “File > Compile Channel Data” or clicking
on the Compile icon.
Advertising