Grass Valley Maestro Master Control v.1.7 - Manual (Page 203)

Maestro Channel Branding User Guide 199
7th Step: Effects Configuration
Figure 156. VBI Passthrough Table
3. Select the lines that you wish to enable to pass through Maestro by
clicking on the check box.
Note To select all lines in a column, click on the column header.
Lines not selected will not pass through Maestro to the output.
4. In the Channel Setup table, assign the appropriate VBI Passthrough
definition to the desired channel as illustrated in
Figure 157 .
Note The VBI Passthrough table configuration only applies to data contained
within the Vertical Ancillary (VANC) space. Data contained within the Hori-
zontal Ancillary (HANC) data space may be replaced by embedded audio data.
Figure 157. Channel Setup Table - VBI Passthrough