Grass Valley Maestro Master Control v.1.7 - Manual (Page 187)

Maestro Channel Branding User Guide 183
7th Step: Effects Configuration
Note If needed, at least one Sonata AES-to-MADI converter is required for each
Maestro channel processor on which the DVE mezzanine is installed. An addi-
tional Sonata converter may be needed for each Maestro channel that
requires routed audio over sources. Direct connect audio over sources do not
require a Sonata converter.
For DVE installation and operating instructions, please refer to Field Mod-
ification Note 075078902, DVE Option.
For Sonata installation instructions, please refer to publication 071860901,
Sonata Series Planning and Installation Manual.
When DVE Configuration is selected, the editor will open a set panel. After
naming the table, select “New.” The system will display a table similar to
that shown in
Figure 141 .
Figure 141. DVE Configuration
Effect Name
Enter or select a name which describes the effect. This field is required and
it cannot be blank. This name will appear on the top line of text in the
“Effects” LCD button on the Control panel. Names that are longer than
nine (9) characters will be truncated on the LCD button
Enter Effect
Select an Enter effect from the drop-down list. The Enter Effect selection
describes the way in which the effect will be presented as it transitions to
air. The “Enter Effect” names describe which background video bus (Pgm,
Aux, Pst) will occupy the squeeze window and be on the Pgm bus at the
end of the transition.
Note The source that occupies the squeeze window after entering an effect will
always be on the Pgm bus regardless of which bus it was on when selected.