Grass Valley Maestro Master Control v.1.7 User Manual
Page 191
Maestro Channel Branding User Guide
187
7th Step: Effects Configuration
Key Frame Program Exit
Click the Key Frame Program Exit arrow. The Key frame effect dialog will
then appear (
).
Figure 145. Key Frame Effect Drop-down List
Enter the preferred values into the respective fields. Clicking the OK button
will save and apply the changes. Clicking the Cancel button will close the
dialog without applying the changes.
Available Audio Modes
When an effect is active, audio from one or both on-air video sources may
be selected. The audio mode may be selected before entering the effect or
while the effect is active by selecting the Audio Only exit mode.
The available audio modes include the following:
•
Pgm - Audio from the Pgm source only
•
Aux - Audio from the Aux source only
•
P/A - Pgm audio as an over to Aux audio
•
A/P - Aux audio as an over to Pgm audio
•
P+A - Pgm and Aux audio both at full level
Only the audio modes selected in the DVE configuration will be available
for selection before entering an effect or as an Audio Only transition while
in the effect. See
for an example.