Automation input, Quick pick – Grass Valley Maestro Master Control v.1.7 User Manual
Page 180
176
Maestro Channel Branding User Guide
Section 5 — The Maestro Configuration Editor
Automation Input
This screen has a table that is used to map input names to index numbers
used by the automation system.
The set is assigned to a channel using the Channel Setup table, as described
on
Figure 133. Automation Input Table (Example)
Dependencies
The Input set Mnemonics under the
section must be defined to con-
tinue with this step.
Source Name
Select the Mnemonic of the input that is to be indexed from the drop-down
list. This name was defined in the input Set (
).
Automation Source Number
Enter an index number for the source (The rage is 1-65535). The automation
source number must match the index number assigned to the same source
in the automation system.
Quick Pick
This screen uses a table to assign inputs to the five “Quick Pick” buttons on
the control panel.
The set is assigned to a channel using the Channel Setup table, which is
described in the