Grass Valley Maestro Master Control v.1.7 User Manual
Page 119
Advertising
Maestro Channel Branding User Guide
115
1st Step: Connections
Baud Rate, Data Bits, Stop Bit, Parity
These entries must agree with those used by the automation computer’s
control port.
When finished select “
Apply
” or “
OK
.” The Name of the Automation Connec-
tion set will now appear in the set panel. The Connection set is assigned to
a Maestro channel using the Channel Setup table (
Multiple Channels
If additional Maestro channels will be controlled by an automation system,
and for some reason the connection protocol will be different from one
channel to another, then additional Connection sets must be created.
Advertising