Interconnection – Grass Valley Maestro Master Control v.1.7 User Manual
Page 156
152
Maestro Channel Branding User Guide
Section 5 — The Maestro Configuration Editor
If the input is embedded, select “Embedded audio” when configuring the
audio levels (instead of selecting an input name).
Source Types
External - The signal from a matrix router. For example, Concerto.
Internal - The sources that are defined in the Content Input set that this
Input set is dependent upon.
Embedded - The audio signal is carried with the video.
Direct - The signal is wired directly to Maestro key cut, key fill or audio
mix over inputs.
Configured Split
The Input table can be arranged to provide split switching. That is, auto-
matic selection of one input on one level (or group) and another input on
another level (or group). For example, “Test 1” could be defined to select
color bars on the video group and test tone on the audio groups.
Interconnection
This table describes the connections between the router outputs and the
Maestro inputs.
When this item is selected, the editor will open a Set Panel.
The set is assigned to a channel using the Channel Setup table, as described
on