Honeywell VRX180 - Manual (Page 181)

Programming Function Blocks and Features
Video Recorder – User Manual 167
Set Up New Schedules
This item contains setup menus for all data sets. Select it to specify what data to store and how to store
it. If a type of data storage is not scheduled, no disk file will be created for it.
ATTENTION
If you make any changes to any item under SET UP NEW SCHEDULES, you must initialize using new
schedules to activate those changes.
The following items appear under SET UP NEW SCHEDULES and are described under the following
headings.
•
Trend Data 1
•
Trend Data 2
•
Trend Data 3
•
Trend Data 4
•
Alarms
•
Events
•
Diagnostics
•
Unit Data
•
Disk capacity
•
Batch Control
Trend Data 1
At the top of the display the message “SETUP IS CURRENT” indicates that current setup for storage of
TREND 1 is exactly as shown. If the message is “SETUP IS NOT CURRENT”, then the TREND 1 setup
has been changed since a disk was last initialized. To make a NOT CURRENT setup CURRENT, you
must initialize the disk using new schedules.
Set up Trend Data 1 as described in Table 4-72.