Honeywell VRX180 - Manual (Page 198)

Setpoint Profiler
Video Recorder – User Manual 184
Segment Loops
You can program up to four segment loops within a profile. A segment loop is one or more consecutive
segments which must repeat a selected number of times before proceeding to the next segment outside
of the loop.
Segment loops are specified by the parameters REPEAT COUNT, FROM SEGMENT #, and TO
SEGMENT #. Loops are reset when Auto Cycle is reset and when the profile is reset. Loops can
contain other loops but cannot overlap.
Loop#1
From Segment # 2
To Segment #3
Repeat Count = 1
S
eg
m
en
t
#2
Segment #3
Segment #1
S
eg
m
en
t
#2
Segment #3
Segm
ent
#4
Segment #5
Repeated segments
Figure 5-9 Example Of A Segment Loop
Examples of valid loops
Loop #1: LOOP FROM SEGMENT = 1
LOOP TO SEGMENT = 10
Loop #2: LOOP FROM SEGMENT = 1
LOOP TO SEGMENT = 9
Loop #1: LOOP FROM SEGMENT = 1
LOOP TO SEGMENT = 10
Loop #2: LOOP FROM SEGMENT = 2
LOOP TO SEGMENT = 10
Loop #1: LOOP FROM SEGMENT = 1
LOOP TO SEGMENT = 10
Loop #2: LOOP FROM SEGMENT = 2
LOOP TO SEGMENT = 9
Example of invalid (overlapping) loops
Loop #1: LOOP FROM SEGMENT = 1
LOOP TO SEGMENT = 9
Loop #2: LOOP FROM SEGMENT = 2
LOOP TO SEGMENT = 10