Honeywell VRX180 - Manual (Page 235)

Online Operation Using Menus
Video Recorder – User Manual 221
7. Online Operation Using Menus
7.1 Overview
Online operation involves interacting with displays and with menus. This section describes how to
interact with the online menus.
The Online Menu is accessed by pressing the Display button, then the Menu button. Or, you can
choose SET MODE from any menu to change the mode.
ATTENTION
Switching to the Online mode from the Program or Maintenance modes by pressing the Display button,
sometimes displays incorrect data for a few seconds before the display data is refreshed. You can avoid this
distraction by selecting ONLINE from the SET MODE menu instead.
The top level of the menu structure is shown in Table 7-1. Your unit may have a reduced menu if
options are not present or if features have been disabled through programming selections.
Table 7-1 Online Main Menu
Menu as displayed Function
SET MODE Change instrument’s operating mode
DATA STORAGE Set up, operate and view the status of the data storage
ACCESS SUMMARIES Display status summaries
DATA ENTRY Adjust function values and states
SETPOINT PROFILES Edit profile parameters. Store and load programs.
TUNE LOOP Enter loop tuning values. Pretune loop.
SET ANALOG OUTPUTS Adjust Analog Output values
REVIEW PROGRAMMING View all programming (read only)