Multi-Tech Systems MTASR1-100 - Manual (Page 101)

Chapter 6 - Configuration Examples
101
6. Click on the WAN tab.
7. Change the default WAN Port IP Address by clicking on the Port Address IP Address text box and back
spacing thru the default address. Enter WAN IP Address of 205.1.7.2.
8. Change the default Remote Address IP Address by clicking on the Remote IP Address text box and
backspacing thru the default IP address. Enter the Remote IP Address of 205.1.7.1.
Click on the OK button to return to the Router Setup dialog box.
9. In the Router Setup dialog box, click on the WAN button.
10. The WAN Port Setup dialog box is displayed with the Port Enabled, Mode set for Asynchronous, and the
Connection Method set to Direct Connect/Leased LIne and Answering.