Multi-Tech Systems MTASR1-100 - Manual (Page 150)

MTASR1-100 Owner’s Manual
150
10 After you have changed the configuration of the remote RouteFinder 100 , click on the Download Setup
button to update the configuration. The remote RouteFinder 100 will be brought down, the new
configuration written to the unit, and the unit will reboot.
11 Click on the Exit button when the downloading is complete.
12 The Hangup connection with Router? dialog box is displayed.
Click on the Yes button to disconnect the phone connection to the remote site.
13 If the same telephone number is not going to be used again in the immediate future, you may want to
remove it from the Port Setup dialog box.
14 At the remote site, reconnect the RouteFinder 100 to the serial port of the PC, and from the Program
Manager screen click on the Router Configuartion icon to verify that the RouteFinder 100 is running.