Multi-Tech Systems MTASR1-100 - Manual (Page 167)

Chapter 8 - Router Management
167
The Applications menu displays six server options for your choice. To enable or disable a server, choose the
server option number and hit the Enter key. Then choose either option 1 to enable the server or option 2 to
disable the server.
The following is a description of each server and its use.
TFTP Server - The TFTP server is used for configuration and firmware updates across the IP internetwork.
TFTP is a file transfer protocol that uses UDP and provides a simple method for transfering files between two
nodes (the server and client).
Telnet Server - The Telnet server allows an authorized Telnet client to remotely access the Telnet server to
dial out, view router configuration and statistics, or modify the router configuation, or remotely modify the user
database.
Async Gateway (AG) Server - The Async Gateway server is a communications gateway for dial-up
communications. The Telnet client can remotely gain access to the server and control the ports.
Terminal Server - The Terminal server allows an incoming call from a terminal (dumb or intelligent) to be
connected to a telnet server.
Dumb TTY - The Dumb TTY allows a remote user to connect to the RouteFinder 100 's command port for
configuation and management of the RouteFinder 100 .