Multi-Tech Systems MTASR1-100 User Manual
Page 31
Advertising
![background image](/manuals/114161/31/background.png)
Chapter 3 - Installation
31
6
Slide the base back into the cabinet with the LEDs going toward the front and the back side grounding
tabs pressing against the side of the cabinet.
7
Turn the RouteFinder
100
up-side-down and replace the cabinet mounting screw in the cabinet.
Figure 3-8. Replacing Cabinet Mounting Screw
8
Turn the RouteFinder
100
right-side-up and return to Table 3-1 to connect the cables.
Advertising