Multi-Tech Systems MTASR1-100 - Manual (Page 126)

MTASR1-100 Owner’s Manual
126
8. In the IPX General Setup dialog box, click on the IPX Routing Enable check box to disable the IPX
routing. Then, click on the OK button to return to the IPX Virtual Port Setup dialog box.
9. Click on the OK button in the IPX Virtual Port Setup dialog box to return to the Router Setup dialog box.
10. In the Router Setup dialog box, click on the Spanning Tree button. The Spanning Tree dialog box is
displayed.
11. Ensure that Bridging and Spanning Tree Algorithm Enable check boxes are enabled and that Ports 1
and 2 display forwarding.
Click on the OK button when you are satisfied with your selection. The Router Setup dialog box is
displayed.
12. In the RouteFinder 100 Setup dialog box click on the WAN button.
13. The WAN Port Setup dialog box is displayed with the Port Enabled, Mode set for Asynchronous, and the
Connection Method set to Direct Connect/Leased Line and Dialing.