Multi-Tech Systems MTASR1-100 - Manual (Page 139)

Chapter 6 - Configuration Examples
139
22. The External Clocking Enabled. Ensure Proper values for Excess Burst Rate and Committed Information
Rate dialog box is displayed, click on OK to configure DLCI 52.
23. Click on the OK button in the Frame Relay DLCI dialog box to return to the Frame Relay Setup dialog
box.
24. Click on the OK button in the Frame Relay Setup dialog box to return to the Main menu.
25. Click on the Download Setup button to down load the frame relay configuration to the RouteFinder.
26. Click on the OK to continue.
The "Looking for response from RouteFinder" dialog box is displayed momentarily.
27. The Writing setup dialog box is displayed as the setup configuration is written to the RouteFinder.
28. When the downloading is complete and the RouteFinder has rebooted (FAIL LED is Off), the RouteFinder
Setup dialog box is displayed with the RouteFinder Status showing Running.