Multi-Tech Systems MTASR1-100 - Manual (Page 137)

Chapter 6 - Configuration Examples
137
7. Change the default Port Address group IP Address to 200.2.11.1 for the Ethernet port of the River Falls
LAN (LAN 2). To change the default IP Address, click on the Port Address IP Address text box and
backspace through the default address. Enter 200.2.11.1.
8. Click on the WAN tab to display the WAN Port and Remote default Addresses for the logical WANs shown
in the lower left corner of the dialog box.
9. Change the default WAN Port Address group IP Address for the River Falls LAN by clicking on the IP
Address text box and back spacing thru the default address. Enter WAN IP Address 200.2.9.2 for logical
WAN 1.
10. Change the default Remote Address group IP Address for logical WAN 1 by clicking on the IP Address
text box and back spacing thru the default address. Enter the Remote IP Address of 200.2.9.1.
11. Click on the Save Changes button to save the logical WAN 1 configuration.
12. Click on the OK button to return to the Main menu.
13. Click on the Frame Relay button to display the Frame Relay Setup dialog box.