Multi-Tech Systems MTASR1-100 - Manual (Page 98)

MTASR1-100 Owner’s Manual
98
At a minimum, you need to enter the type of WAN device connected to the WAN port (e.g., I-Way Hopper
for the Multi-Tech's IDSN Terminal Adapter) in the Modem Type field. You also need to fill in the Dial
Prefix field, e.g., ATDT, and the Modem Command 1 field with an initialization string for your device,
e.g., AT&F for the default configuation. Refer to the WAN device User Documentation for this
information.
14. Click on Synchronous in the Mode check box. Then refer to the WAN Device User Documentation to
determine whether the device can supply clocking or if it needs the clock produced by the RouteFinder 100 .
Click on the appropriate Clock check box and if Internal Clock is necessary, click on Clock Speed pull
down list box and highlight the clock speed.
For the Mounds View LAN, the WAN Port Setup dialog box should have the following fields checked:
x Port Enable x Synchronous
x Internal Clock or External Clock (Clock Speed _____)
x Direct Connect/Leased Line
15. Click on the OK button to return to the Router Setup dialog box.
16. Click on the Download Setup button to change the configuration of the RouteFinder 100 .
17. Click on the OK button to continue.