1 introduction, 2 unpacking, Unpacking – Multi-Tech Systems MTASR1-100 User Manual
Page 28: 1 introduction 3.2 unpacking
MTASR1-100 Owner’s Manual
28
3.1
Introduction
This chapter is organized in the way you will unpack and cable your RouteFinder
100
. The unpacking section
describes the contents of the shipping box and shows how the RouteFinder
100
is packaged. The installation
procedure describes each cable connection and shows where that cable is connected to the RouteFinder
100
.
3.2
Unpacking
The shipping box contains the RouteFinder
100
, external power supply, a plastic bag containing cables, your
owner's manual, and the software diskette. Inspect the contents for signs of any shipping damage. If damage
is observed, do not power up the unit, contact Multi-Tech's Technical Support for advice (refer to Chapter 9).
If no damage is observed, place the RouteFinder
100
in its final location and perform the Installation Procedure
in Table 3-1.
Save the shipping box in case a return shipment is necessary.
Figure 3-1. Unpacking