Multi-Tech Systems MTASR1-100 - Manual (Page 91)

Chapter 5 - RouteFinder Software
91
5.7.1 Add User
The Add User dialog box lets you add user information such as user name, password, and callback
information on each user in the data base.
User Name
The User Name can have as many as 39 characters. All printable characters are permitted with the restriction
that a blank cannot appear in the user name. The user name is treated as a case insensitive string in a dial-in
and dial-out applications.
User Password
The User Password can have as many as 7 characters. In places where the password is used as a character
string, it is treated as a case insensitive string. Elsewhere (PPPs CHAP), it is treated as a case sensitive
pattern.
Call Back Security Enabled
This parameter is of use in dial-in applications where the user is required to be called back at a specific
location. Enabling this parameter results in having the administrator assigning the callback parameters.
Disable this if the user is to be permitted to choose the callback number and callback delay.
Call Back Number
The callback number is editable only if callback security is enabled. This is the number where the user will be
called back. The user cannot choose the location where he wants to be called back.
Call Back Delay
Call back delay is editable only if callback security is enabled. This specifies the duration after which the user
will be called back at the administrator-assigned number.
Protocols
This lets you select the protocol(s) in which the user is allowed to dial into the RouteFinder.
Dial In Ports
This allows you to select the port over which the user is permitted to dial into the RouteFinder.
Dial Out Ports
This allows you to select the port over which the user is permitted to dial out from the RouteFinder.