Multi-Tech Systems MTASR1-100 - Manual (Page 119)

Chapter 6 - Configuration Examples
119
7. In the Router Setup dialog box, click on the IPX button.
8. In the IPX Virtual Port Setup dialog box, click on the Advanced button to display the IPX General Setup
dialog box.
9. In the IPX General dialog box, click on the IPX Routing Enable check box to disable the IPX routing.
Then, click on the OK button to return to the IPX Virtual Port Setup dialog box.
10. Click on the OK button in the IPX Virtual Port Setup dialog box to return to the Router Setup dialog box.
11. In the Router Setup dialog box, click on the Spanning Tree button. The Spanning Tree dialog box is
displayed.