Multi-Tech Systems MTASR1-100 - Manual (Page 131)

Chapter 6 - Configuration Examples
131
4. Click on the OK button in the Frame Relay Setup dialog box to return to the Main menu.
5. From the Main menu, click on the IP button to display the IP Port Setup dialog box.
6. The IP Port Setup dialog box is displayed with the Ethernet tab highlighted and the default Ethernet Port
IP Address Displayed.
7. Change the default Port Address group IP Address to 200.2.8.1 for the Ethernet port of the Mounds View
LAN (LAN 1). To change the default IP Address, click on the Port Address IP Address text box and
backspace through the default address. Enter 200.2.8.1.
8. Click on the WAN tab to display the WAN Port and Remote default Address for the logical WAN shown in
the lower left corner of the dialog box.