Multi-Tech Systems MTASR1-100 - Manual (Page 179)

Chapter 9 - Dial Out Client Software
179
9.2.5 Installing and Configuring the WINMCSI Modem-Sharing
Software
The WINMCSI modem-sharing software manages access to a MultiRouter for inbound and outbound calls. It
allows Windows communications software packages that do not support INT6B or INT14 to connect to our
gateways (e.g., MultiRouter). It also detects other compatible communications servers (e.g.,
MultiComAsyncGatewayII and MultiComRNGateway) on your network and displays the resources they provide
to eligible LAN users.
To install WINMCSI, follow the steps below.
For Windows 3.1, Windows for Workgroups 3.11, or Windows95 users:
1. Power on your client PC and log in to your LAN.
2. Start Windows.
3. Insert the Dial Out Client diskette into your floppy disk drive.
For Windows 3.1 or Windows for Workgroups 3.11 users:
4a. From your Program Manager, click on File | Run.
4b. In the Command Line field, type a:\install. Click on OK.
4c. Go to step 5.
For Windows95 users:
4a. Click on Start.
4b. Go to Settings.
4c. Click on Control Panel.
4d. Double-click on the Add/Remove Programs icon.
4e. The Install/Uninstall Program menu appears. Click on Install.
4f. Click on Next. If you want to install WINMCSI as a 32-bit program, then let Windows95 locate the proper
install.exe file on the Dial Out Client disk in your floppy drive. If you want to install WINMCSI as a 16-bit
program, then type a:\winmcsi\install.exe.
4g. Click on Finish.
5. The WINMCSI Installation Program window appears.
6. Click in the Continue button if you want to continue with the WINMCSI installation, and continue with Step
7.
Click on the Abort button if you do not want to install WINMCSI.