Multi-Tech Systems MTASR1-100 - Manual (Page 102)

MTASR1-100 Owner’s Manual
102
With a dial-up line and an async modem, the Mode needs to be Asynchronous (the default) and the
Connection Method needs to be either Answering or Dialing. For the Minneapolis site it needs to be
Dialing.
With a leased line, the Mode needs to be Synchronous and the Connection Method needs to be Direct
Connect/Leased Line.
For a dial-up connection, perform steps 10,11,and 12 and then skip to step 14.
For a leased line connection, skip to step 13.
11. Change the connection method to Dialing by clicking on the Direct Connect/Leased Line check box.
For the Minneapolis LAN, the WAN Port Setup dialog box should have the following fields checked:
x Port Enable x Asynchronous
x 115200 x Dialing
Ensure that the Modem Init String and the Modem Dial String for the external ISDN TA are entered
correctly. Refer to the WAN device User Documentation for the strings.
12. Click on the Advanced button to display the WAN General Setup dialog box.
13. Click on the Modem Types drop down text box and click on your modem type. If your WAN device is not
listed in this text box, click on the Add Modem button to display the Modem Types dialog box.