Multi-Tech Systems MTASR1-100 - Manual (Page 164)

MTASR1-100 Owner’s Manual
164
If you choose to configure the dial-out port (Option 2) from the Dial-out Configuration menu, you can select the
baud rate, number of data bits, parity, and the number of stop bits.
Router Configuration
The Router Configuration option allows you to view and change parameters on the protocol stacks, high and
low level device drivers, enable or disable the supported servers from a remote location or view system
information. If the password option is enabled, you will be prompted for a password.
The Main Menu provides five options. The Main Menu is shown below. To select an option, enter the number
of the option and hit the Enter key. For example, to select the Protocol Stacks option, enter 1 and hit the Enter
key.