Multi-Tech Systems MTASR1-100 - Manual (Page 121)

Chapter 6 - Configuration Examples
121
15. Change the Connection Method Answering by clicking on the Direct Connect/Leased Line check box.
For the Mounds View LAN, the WAN Port Setup dialog box should have the following fields checked:
x Port Enable x Asynchronous
x 115200 x Answering
16. Click on the Advanced button to display the WAN General Setup dialog box.
17. Click on the Modem Types drop down text box and click on your modem type. If your WAN device is not
listed in this text box, click on the Add Modem button to display the Modem Types dialog box.
At a minimum, you need to enter the type of WAN device connected to the WAN port (e.g., I-WAy Hopper
for the Multi-Tech's ISDN Terminal Adapter) in the Modem Type field. You also need to fill in the Dial
Prefix field, e.g., ATDT, and the Modem Command 1 field with an initialization string for your device,
e.g., AT&F for the default configuration. Refer to the WAN device User Documentation for this
information.
18. Click on Synchronous in the Mode check box. Then refer to the WAN Device User Documentation to
determine whether the device can supply clocking or if it needs the clock produced by the RouteFinder 100 .
Click on the appropriate Clock check box and if Internal Clock is necessary, click on Clock Speed pull
down list box and highlight the clock speed.
For the Mounds View LAN, the WAN Port Setup dialog box should have the following fields checked:
x Port Enable x Synchronous
x Internal Clock or External Clock (Clock Speed _____)
x Direct Connect/Leased Line
19. Click on the OK button to return to the Router Setup dialog box.