Multi-Tech Systems MTASR1-100 - Manual (Page 106)

MTASR1-100 Owner’s Manual
106
2. When the Router Setup Main Screen is displayed, click on the IPX button.
3. The IPX Virtual Port Setup dialog box is displayed with the RAW tab highlighted.
4. It is recommended that a RouteFinder 100 connected to a file server on a LAN leave the default Auto Learn
enabled for all the frame types, except the WAN ports. Verify that each frame type has the Network text
box displaying Auto Learn.
5. Click on the Advanced button and verify that Port Enable check box is active in the IPX General Setup
dialog box and that Auto Learn is active.
Click on the Router Name text box and back space through the default name and enter Mounds_View.
Click on OK button to return to the IPX Virtual Port Setup dialog box.
6. Click on the WAN tab and change the default Network number to 11113456.
To change the network number, click on the Network plain box and back space through the default
network number and enter your 8-digit network number (11113456).