Multi-Tech Systems MTASR1-100 - Manual (Page 78)

MTASR1-100 Owner’s Manual
78
Filtering Entries List
This area lists the currently established IPX filters in the RouteFinder database. The first column shows the
type of filter (like filter on source address being equal or forward on destination address being equal, etc.).
Second column list the port on which the filter is applicable. Third column shows the IPX address for which we
need the filtering.
Add
This option establishes a new IPX filter in the filtering database.
Remove
Current selection in the filtering database list can be deleted with this option.
Edit
Current selection in the filtering database list can be edited with this option
To add an IPX filter, the Add IPX Filter dialog box is displayed that lets you add a new entry to the IPX filtering
database.
Network Number The network number to be checked for filtering or forwarding.
Node Number The node number to be checked for filtering or forwarding.
Socket Number The socket number to be checked for filtering or forwarding. Alternatively some well
known sockets like SAP, RIP can be chosen from a predefined list.
Physical Port Defines the physical port on which the filtering is to be performed.
Filter Type
Filter on Destination Address - Drop all IPX packets whose whose destination IPX address matches the IPX
address entered in the above field.
Filter on Source Address - Drop all IPX packets whose source IPX address matches the IPX address entered
in the above field.
Forward on Destination Address - Forward all IPX packets whose destination IPX address matches the IPX
address entered in the above field.
Forward on Source Address - Forward all IPX packets whose source IPX address matches the IPX address
entered in the above field.