Multi-Tech Systems MTASR1-100 User Manual
Page 152
MTASR1-100 Owner’s Manual
152
The Reading Setup dialog box is displayed.
6
The Router Setup dialog box is then displayed. This is the dialog box of the remote RouteFinder
100
. You
can select any of the Protocol Stacks, Device drivers, or other buttons and change the configuration of the
remote RouteFinder
100
. Refer to the Menus Chapter (Chapter 5) for the definition of each dialog box and
field within a dialog box.
7
After you have changed the configuration of the remote RouteFinder
100
, click on the Download Setup
button to update the configuration. The remote RouteFinder
100
will be brought down, the new
configuration written to the unit, and the unit will reboot.
8
Click on the Exit button when the downloading is complete.
9
Click on the Router Configuration icon in the Program Manager screen to verify that the RouteFinder
100
is
running.