Chicago - ipx protocol, Setting up the chicago operation with ipx protocol – Multi-Tech Systems MTASR1-100 User Manual
Page 111
Advertising
Chapter 6 - Configuration Examples
111
6.2.4 Setting up the Chicago Operation With IPX Protocol
In this example, the Chicago LAN is going to be configured with unique network numbers for each frame type.
All frames are enabled. Each frame type in this example has a network number assigned in Figure 6-2.
1.
From the console PC, load Windows® and at the RouteFinder
100
Program Group, double click on the
Router Configuration icon.
2.
When the Router Setup Main Screen is displayed, click on the IPX button.
3.
The IPX Virtual Port Setup dialog box is displayed with the RAW tab highlighted.
4.
Click on the Advanced button and when the IPX General Setup dialog box is displayed, click on the Auto
Learn Ethernet Network Numbers check box to disable Auto Learn.
Advertising