Multi-Tech Systems MTASR1-100 User Manual
Page 112
MTASR1-100 Owner’s Manual
112
5.
Click on Router Name text box and back space through the default name and enter Chicago.
If the Chicago LAN had a file server, then Auto Learn Ethernet Network Numbers would have to be active.
6.
Click on the OK button to return to the RAW frame type.
7.
Change the default Network number for the RAW frame type to 02123456. To change the Network
number, click on the Network Plain box and back space through the default network number and enter
your 8-digit network number (02123456).
8.
Repeat step 7 for the following frame types:
Change the default Network number for LCC frame type to 03123456. Change the TYPE II frame type to
04123456. Change the SNAP frame type to 05123456.
9.
Click on the WAN tab and change the default Network number to 11113456.
To change the network number, click on the Network plain box and back space through the default
network number and enter your 8-digit network number (11113456).
10. Click on the OK button when you are satisfied with your selection.
11. The RouteFinder
100
Setup dialog box is displayed.