3 configuring the minneapolis site, Minneapolis - frame relay, Configuring the minneapolis site – Multi-Tech Systems MTASR1-100 User Manual
Page 141
Chapter 6 - Configuration Examples
141
6.3.3 Configuring the Minneapolis Site
1.
From the console pc, load Windows
®
and at the RouteFinder Program Group, double click on the Router
Configuation icon.
2.
When the RouteFinder Setup dialog box is displayed, click on the Frame Relay button.
3.
The Frame Relay setup dialog box is displayed, click on the Enable check box to activate frame relay.
Nothing else has to be done in this dialog box at this time. We will come back to this dialog box later.
4.
Click on the OK button in the Frame Relay Setup dialog box to return to the Main menu.
5.
From the Main menu, click on the IP button to display the IP Port Setup dialog box.
6.
The IP Port Setup dialog box is displayed with the Ethernet tab highlighted and the default Ethernet Port
IP Address Displayed.