Multi-Tech Systems MTASR1-100 - Manual (Page 124)

MTASR1-100 Owner’s Manual
124
6.2.6 Setting up St. Louis Operation for Bridging
Spanning Tree Bridging is used to support networking protocols like NetBIOS. In this example, the St. Louis
LAN is bridging nonIP and IPX protocols to the Mounds View LAN using an external ISDN terminal adapter set
up in either a Dial 115.2K Async mode or a 128K Sync mode with a leased line.
1. From the console PC, load Windows® and at the RouteFinder 100 Program Group, double click on the
Router Configuration icon.
2. When the Router Setup Main Screen is displayed, click on the IP button.
3. In the IP Port Setup dialog box, click on the Advanced button.
4. In the IP General Setup dialog box, click on the IP Routing Enable check box to disable the IP Routing.