Multi-Tech Systems MTASR1-100 User Manual
Page 99
Advertising
Chapter 6 - Configuration Examples
99
18. When the downloading is complete and the RouteFinder
100
has rebooted (FAIL LED is Off), the Router
Setup dialog box is displayed with the Router Status showing Running.
19. Click on the Exit button in the Router Setup dialog box to return to the Program Manager screen.
20. Double click on the WAN Device Configuration icon.
21. The Router Print Console menu is displayed, you can enter AT commands to configure the external ISDN
TA.
Refer to your WAN device User Documentation for configuration.
22. When your external ISDN TA is configured, click on File in the Tool Bar and then click on Exit in the
dialog box.
Advertising