Multi-Tech Systems CDMA Wireless Modem - Manual (Page 127)

Chapter 16 – Provisioning AT Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 127
Packet Dial String +WPDS
Description: This command is used to set the packet dial string.
Values:
<string>
A string of length 0 to 16 characters.
Syntax:
Command syntax: AT+WPDS=<string>
Command Possible Responses
AT+WPDS?
Note: Get current Packet Dial String +WPDS: ”#777”
OK
Note: Current Packet Dial String is #777
AT+WPDS=”#999”
Note: Set the Packet Dial String to #999 OK
Primary CDMA Channels +WPCC
Description: This command is used to set the primary CDMA channels for 800Mhz CDMA operation only.
Values entered must be valid CDMA 800Mhz Channel numbers.
Values:
<channel a number>
Value range: 0 – 2047
<channel b number>
Value range: 0 – 2047
Syntax:
Command syntax: AT+WPCC=<channel a number>,<channel b number>
Command Possible Responses
AT+WPCC?
Note: Get current primary CDMA channels +WPCC: 283,384
OK
AT+WPCC=211,432
Note: Set the primary CDMA channels OK
Secondary CDMA Channels +WSCC
Description: This command is used to set the secondary CDMA channels for 800Mhz CDMA operation
only. Values entered must be valid CDMA 800Mhz Channel numbers.
Values:
<channel a number>
Value range: 0 – 2047
<channel b number>
Value range: 0 – 2047
Syntax:
Command syntax: AT+WSCC=<channel a number>,<channel b number>
Command Possible responses
AT+WSCC?
Note: Get current secondary CDMA channels +WPCC: 691,777
OK
AT+WPCC=511,632
Note: Set the secondary CDMA channels OK