Multi-Tech Systems CDMA Wireless Modem - Manual (Page 42)

Chapter 5 – Call Control Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 42
Echo Cancellation +ECHO
Description: This command is used to enable, disable or configure the Echo Cancellation functions for
voice calls (in rooms, in cars, etc.). The +SPEAKER function automatically sets echo
cancellation based upon handset or headset choice and this command allows non-standard
operation.
Values:
<mode>
0: Vocoder Echo Cancellation Off
1: Ear Seal Echo Cancellation
2: Head Set Echo Cancellation
3: AEC
4: Speaker Echo Cancellation for car kit operation
5: Default Echo Cancellation for current path settings
Syntax:
Command syntax: AT+ECHO= <mode>
Command Possible Responses
AT+ECHO?
Note: Read current settings +ECHO: 0
OK
AT+ECHO=0
Note: Set Echo Cancellation Off OK
AT+ECHO=1
Note: Set Echo Cancellation to Ear Seal OK
AT+ECHO=2
Note: Set Echo Cancellation to Headset OK
AT+ECHO=4
Note: Set Echo Cancellation to Handset OK
Side Tone Modification +SIDET
Description: This command is used to set the level of audio feedback in the speaker (microphone
feedback in the speaker).
Values: <val1>
0: Sidetone is disabled
1: Sidetone is enabled
<val2>
0: No side tone
1: Handset Sidetone levels
2: Headset Sidetone levels
3: Max Sidetone level
Syntax: Command syntax: AT+SIDET=<val1>,<val2>
Command Possible Responses
AT+SIDET=1,0 OK
Note: Command valid
AT+SIDET?
Note: Current value +SIDET: 1,0
OK
Note: Command valid