Multi-Tech Systems CDMA Wireless Modem - Manual (Page 162)

Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 162
Set MN-HA Shared Secrets $QCMIPMHSS
Description: This command is used to set MN-HA shared secrets for the currently active profile.
Values:
<String>The shared secret text to be stored.
<Val>
0: Do not commit to NV
1: Commit to NV
Note 1: Double quotes are only required if the string contains a command.
Note 2: If the value provisioned is not committed to NV, the temporary value will be deleted
at the end of the following call if $QCMIPP is called.
Syntax:
Command syntax: AT$QCMIPMHSS =<String>,<Val>
Command Possible Responses
AT$QCMIPMHSS?
Note: Display the current setting $QCMIPMHSS: Set
OK
Note: Command is valid
AT$QCMIPMHSS=?
Note: Display the range of values $QCMIPMHSS: (20,21,23-7E),(0-1)
OK
Note: Command is valid
AT$QCMIPMHSS=20,0
Note: Set value to 20, 0 OK
Note: Command is valid
Set MN-AAA Shared Secrets $QCMIPMASSX
Description: This command is used to set MN-AAA shared secret for the currently active profile in HEX.
Values:
<HEX> Hex value from 0 to FFFFFFFF
<Val>
0: Do not commit to NV
1: Commit to NV
Note: If the value provisioned is not committed to NV, the temporary value will be deleted at
the end of the following call if $QCMIPP is called.
Syntax:
Command syntax: AT$QCMIPMASSX =<HEX>,<Val>
Command Possible Responses
AT$QCMIPMASSX?
Note: Display the current setting $QCMIPMASSX: Set
OK
Note: Command is valid
AT$QCMIPMASSX=?
Note: Display the range of values $QCMIPMASSX: (0-FFFFFFFF),(0-1)
OK
Note: Command is valid
AT$QCMIPMASSX=FF,0
Note: Set value to 0xFF, but not commit OK
Note: Command is valid