Multi-Tech Systems CDMA Wireless Modem - Manual (Page 136)

Chapter 17 – Extended AT Commands in IS707.3
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 136
Request Manufacture Identification +GMI
Description: The command is used to cause the DCE to transmit one or more lines of information text,
determined by the manufacturer, which is intended to permit the user of the DCE to identify
the manufacturer.
Syntax:
Command syntax: AT+GMI
Command Possible Responses
AT+GMI?
Note: Display the current setting. ERROR
Note: Command is not valid
AT+GMI
Note: Display the manufacturer +GMI: MODEM
OK
Note: Command is valid
Request Manufacture Identification +GMM
Description: The command is used to cause the DCE to transmit one or more lines of information text,
determined by the manufacturer, which is intended to permit the user of the DCE to identify
the specific model of device.
Syntax:
Command syntax: AT+GMM
Command Possible Responses
AT+GMM?
Note: Display the current setting. ERROR
Note: Command is not valid
AT+GMM
Note: Display the model +GMM: Model 72
OK
Note: Command is valid
Request Revision Identification +GMR
Description: The command is used to cause the DCE to transmit one or more lines of information text,
determined by the manufacturer, which is intended to permit the user of the DCE to identify
the version, revision level or date, or other pertinent information of the device.
Note: When there is no stored PRL, the value displayed for the PRL ID will be 0.
Syntax:
Command syntax: AT+GMR
Command Possible Responses
AT+GMR?
Note: Display the current setting. ERROR
Note: Command is not valid
AT+GMR
Note: Display the revision +GMR: S/W VER: WISMOQ WQ1.8, 10015
OK
Note: Command is valid